ShareThis Page

Specialty Products

Minwax® Tung  Oil Finish

Minwax® Tung  Oil Finish

Minwax® Tung Oil Finish is an oil-based protective finish that also gives wood a hand-rubbed lustre. Minwax® Tung Oil Finish penetrates wood pores and restores vitality to dry, thirsty wood. Minwax® Tung Oil is easy to maintain and can be applied over stained and unstained wood. Give your wood the care and protection it deserves with an application of Minwax® Tung Oil Finish.


Product Details

Application Tool: cloth or brush
Recoat: after 24 hours
Dry time: 5-10 minutes prior to buffing
Cleanup: mineral spirits or paint thinner following manufacturer’s safety instructions
Coverage: 125-150 sq. ft. per quar
Coats: 2 or 3
Recommended Uses: furniture, antiques, woodwork, cabinets, doors, paneling, accessories

Directions

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

Directions

  1. Sand to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits.
  2. Apply Minwax® Wood Finish™ Stain, if desired, following the label directions.
  3. Wipe or brush on a generous coat of Minwax® Tung Oil. Apply in the direction of the grain.
  4. After 5-10 minutes, buff evenly with a clean, lint-free cloth.
  5. Wait 24 hours and apply a second coat. Two coats are recommended.
  6. For additional gloss, repeat after 24 hours.
  7. With Minwax® Tung Oil you control the brightness of the finish because the surface gains more gloss with each coat you apply.

Cleanup: Use mineral spirits or paint thinner following manufacturer's safety instructions

Note: Not recommended for floors