Minwax® Super Fast-Drying Polyurethane for Floors

Minwax Super Fast-Drying Polyurethane for Floors is a clear, oil-based, durable, protective finish specifically formulated for use on hardwood floors.


  • Superior durability for hardwood floors
  • Optimized drying technology results in faster recoat time between coats
  • No sanding required between coats
  • Advanced anti-settling formula ensures less stirring and fewer highs and lows across large surfaces, resulting in an even sheen

Reviews

From Real Homes

Get Inspired

See what’s possible, and then make it happen. Tag @minwaxusa on Instagram to have your project featured.

Application Directions

  • Preparation Warning
    Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
  • PREPARATION
    • Sand the floor
  • APPLICATION
    • Before use, thoroughly stir Minwax® Super-Fast Drying Polyurethane for Floors to rotate the product from the bottom to the top of the can. You will not need to stir again if the project will be completed in one day.
    • Apply a thin coat using a lambswool or synthetic pad applicator, or a natural bristle brush. Maintain a wet edge to avoid lap marks.
    • Allow the finish to dry 3-4 hours, but less than 12 hours. If this timing is followed, no sanding between coats is needed! But if you have let the finish dry for more than 12 hours, sand the finish lightly with 220 grit sandpaper. Allow 3-4 hours dry time before you sand.
    • Apply a second coat following the directions above.
  • CAUTIONS
    DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS. Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.

Data Sheets:

Product Number Base Container Size SDS
027426130210 Clear 1 Gallon SDS
027426130227 Clear 1 Gallon SDS
027426130203 Clear 1 Gallon SDS
027426130319 Clear 2-1/2 Gallon SDS
027426130326 Clear 2-1/2 Gallon SDS
027426130302 Clear 2-1/2 Gallon SDS

WHAT ARE THE ADVANTAGES OF USING MINWAX® HARDWOOD FLOOR CLEANER?

Minwax® Hardwood Floor Cleaner has been exclusively formulated for use on hardwood, laminate, and pre-finished floors. Unlike other surface cleaners, Minwax® Hardwood Floor Cleaner is designed to clean wood floors without leaving a residue, which other all-purpose cleaners may leave.

CAN I USE MY MINWAX® HARDWOOD FLOOR CLEANER ON FINISHED HARDWOOD FLOORS, LAMINATES, AND PRE-FINISHED FLOORING?

Yes. Minwax® Hardwood Floor Cleaner can be used on surfaces such as laminates and pre-finished floors in addition to hardwood floors.

DOES MINWAX® HARDWOOD FLOOR CLEANER NEED TO BE MIXED WITH WATER?

No. It comes premixed and ready to use.

WHAT HAPPENS IF MINWAX® HARDWOOD FLOOR CLEANER IS ACCIDENTALLY USED IN EXCESS ON OILED, WAXED OR RAW WOOD SURFACES?

Minwax® Hardwood Floor Cleaner will not permanently damage wood. If the product is accidentally left on a wood surface finished with wax or oil, the finish may turn white, as it would if water were left on it for a long period of time. If the application of more finish does not repair the whitened areas, then reapply the oil finish using fine steel wool.