Minwax® Ultra Fast-Drying Polyurethane for Floors

Minwax® Ultra Fast-Drying Polyurethane for Floors is a clear, water-based, durable protective finish specifically formulated for use on hardwood floors.


  • Great durability for hardwood floors
  • Optimized drying technology results in faster recoat time between coats
  • No sanding between coats
  • Advanced anti-settling formula ensures less stirring and fewer highs and lows across large surfaces, resulting in an even sheen
  • Provides a slightly amber tone to the floor
Sheens
Gloss, Satin, Semi-Gloss

Reviews

From Real Homes

Get Inspired

See what’s possible, and then make it happen. Tag @minwaxusa on Instagram to have your project featured.

Application Directions

  • Preparation Warning
    Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
  • APPLICATION OVERVIEW
    STEP 3: APPLY MINWAX® ULTIMATE FLOOR FINISH- Before use, thoroughly stir Minwax Ultimate Floor Finish to rotate the product from the bottom to the top of the can. Do not shake.- Apply a thin coat using a new synthetic pad applicator. Maintain a wet edge to avoid lap marks.- Allow the finish to dry at least 2 hours, but less than 24 hours. If this timing is followed, no sanding between coats is needed! But if you have let the finish dry for more than 24 hours, sand the finish lightly with 220-grit sandpaper. Do not scuff through to bare wood.- Apply a second coat following the steps above.If you are applying Minwax Ultimate Floor Finish to bare wood, apply a third coat, following the steps above. If this is a “screen and recoat,” or if you are applying Minwax Ultimate Floor Finish over stain, only 2 coats are required.

Data Sheets:

Product Number Base Container Size SDS PDS
027426140011 Clear 1 Gallon SDS PDS
027426140028 Clear 1 Gallon SDS -
027426140035 Clear 1 Gallon SDS -

WHAT ARE THE ADVANTAGES OF USING MINWAX® HARDWOOD FLOOR CLEANER?

Minwax® Hardwood Floor Cleaner has been exclusively formulated for use on hardwood, laminate, and pre-finished floors. Unlike other surface cleaners, Minwax® Hardwood Floor Cleaner is designed to clean wood floors without leaving a residue, which other all-purpose cleaners may leave.

CAN I USE MY MINWAX® HARDWOOD FLOOR CLEANER ON FINISHED HARDWOOD FLOORS, LAMINATES, AND PRE-FINISHED FLOORING?

Yes. Minwax® Hardwood Floor Cleaner can be used on surfaces such as laminates and pre-finished floors in addition to hardwood floors.

DOES MINWAX® HARDWOOD FLOOR CLEANER NEED TO BE MIXED WITH WATER?

No. It comes premixed and ready to use.

WHAT HAPPENS IF MINWAX® HARDWOOD FLOOR CLEANER IS ACCIDENTALLY USED IN EXCESS ON OILED, WAXED OR RAW WOOD SURFACES?

Minwax® Hardwood Floor Cleaner will not permanently damage wood. If the product is accidentally left on a wood surface finished with wax or oil, the finish may turn white, as it would if water were left on it for a long period of time. If the application of more finish does not repair the whitened areas, then reapply the oil finish using fine steel wool.

  • Minwax® Product Warranty
    SATISFACTION GUARANTEE LIMITED WARRANTY. This warranty is made to you, the product purchaser who owns the property where the product is applied. This warranty is not transferable except that if a contractor purchased and applied the product to the property for you, then the warranty is transferable to you. If this product, when applied and maintained according to product application and maintenance instructions to a properly prepared surface, fails to perform to your complete satisfaction, Minwax shall, upon presentation of proof of purchase, either replace an equivalent quantity of product free of charge or refund the original purchase price. For a replacement or refund please contact customer service at 1-800-523-9299. This warranty shall not apply to any defect, damage, or product failure resulting from improper surface preparation, structural defects, environmental damage, failure of a previous product, deterioration or defect in the underlying substrate, or improper application or maintenance of the product. Your exclusive remedy, and Minwax's sole liability, under this warranty is the replacement of product or refund and does not include labor or costs associated with the application or removal of any product. IN NO EVENT SHALL MINWAX BE LIABLE FOR ANY TYPE OF INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, PUNITIVE, OR INDIRECT DAMAGES WHETHER OR NOT PURCHASER IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL HAVE THE SAME DURATION AS THE ABOVE EXPRESS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts or limitations on incidental or consequential damages, so portions of the limitations above might not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.